Clear Guides
How to Seal Tile Grout
Keep your tile looking new. 30 minutes, once a year.
Time 30 minsDifficulty EasyTools Grout sealer, applicator
The short version
- Clean the grout thoroughly and let it dry completely.
- Apply sealer evenly along all grout lines.
- Wipe excess off the tile surface within 5 minutes.
- Let cure for 24 hours before getting it wet.
What you need
Your car should already have all of this: a jack, a lug wrench, and a spare tire (usually under the trunk floor or mounted underneath). Check your owner's manual if you can't find them.
Directions
- Clean first. Scrub the grout lines clean and let them dry completely. Sealer won't stick to dirty or wet grout.
- Apply the sealer. Using the applicator bottle or a small brush, run sealer along every grout line. Work in small sections.
- Wipe the tile. Within 5 minutes, wipe any excess sealer off the tile surface with a clean cloth. Don't let it dry on the tile.
- Let it cure. Keep the area dry for 24 hours. The sealer needs time to bond and protect.